Description

• Fully automatic self-adjustment to commercially available single-, multi- and fine-stranded conductors with standard insulation throughout the entire capacity range from 0.03 to 10.0 mm²
• Applicable for single or multi-wire PVC-, and a large variety of
  Teflon ®- , Radox®-, or rubber-insulated cables
• For wire sizes 0.03 to 10 mm² (AWG 32-8)
• Solid metal clamping jaws
• Length stop for preadjustment of stripping length up to 18 mm
• Blade and lenght stop easy to replace
• Built-in wire cutter for Cu and Al multi-wire cables up to 10mm²/AWG 8 and single-wire cables up to 6 mm²/AWG10
• Tool body made of glass fiber reinforced plastic
• Ergonomic, two-component handles
• Made in Germany by Rennsteig

Description

• Special hand tool for high-quality stripping and dismantling of single and multi-wire cables
• With an adjustable length stop when cutting the same stripping lengths during repetitive work
• Form-fit stripping also of difficult-to-remove insulating materials such as Teflon^®, silicone, Radox^®, Kapton^® and rubber; multi-layer too
• No pinching of deforming of cable ends by a special cutting mode
• Over 53 interchangeable blades for different wire ranges (Please take a look)
• Customized blade designs on request
• Automatic release after operation
• Solid construction, easy to handle
• Chrome plated or burnished body. ergonomically designed two-component handles
• Made in Germany by Rennsteig

• Designed to strip copper cables (incl. Teflon®) ranging from 0.005-0.14 mm² (AWG 40-26)
• Fixstop for wire ranges 0.02/0.01 mm² (AWG 34/36) and 0.008/0.005 mm² (AWG 38/40)
• Swing stop for wire ranges 0.14/0.08 mm² (AWG 26/28) and 0.06/0.03mm² (AWG 30/32)
• 2 stripping positions, each on front and backside, laser marked
• Made in Germany by Rennsteig

• For stripping the most common standard insulations of single-strand, multi-strand and fine-strand conductors, available in two versions for cross-sectional range 0.03 to 10 mm², as well as for thin ribbon cable up to 10 mm width and for cross-sectional range 2.5 to 16.00 mm²
• Stripping blades automatically adjust to the various insulation thicknesses without presetting
• Automatic opening of clamping jaws after stripping
• No damage to the conductors, no splitting up oft the individual conductors
• Stripping length adjustable from 3 to 18 mm via length stop
• Stripping pressure adjustable for hard plastic insulation
• With wire cutter for multi-strand conductors up to 10 mm² and for single-strand conductors up to 6 mm²
• Easily replaceable clamping jaws and stripping blades
• Low weight, easy action
• Casing made of glass fiber reinforced plastic
• Made in Germany by Rennsteig

• 1000V Volt Insulated
• For dismantling of cables
• No damage of conductor insulation
• Sickle-shaped blade made of stainless steel
• With a guide shoe at the blade point
• With transparent protective cap
• Insulated according to VDE standard
• Convenient handling
• Safety design of grip
• Made in Germany by Knipex