Circlip Pliers for large external circlips (Retaining Rings) with locking device (can be released). Pliers with straight tips and 90° bent tips available.

Made in Germany by Rennsteig.

Circlip Pliers for large internal circlips (Retaining Rings) with locking device (can be released). Pliers with straight tips and 90° bent tips available.

Made in Germany by Rennsteig.

Description

• To provide plastic skirtings, cases and cable ducts with recesses for sanitary and heating installations
• Pliers for different cutting profiles and with different grip lengths available
• Easy draw cut acc. to shear principle
• Neat cutting edges, precise cutting of the rubber lips on the skirtings
• Easy handling opening spring for automatic opening after notching
• Cuting head: special tool steel
• Surface: burnished
• Plastic coated grips or ergonomically designed two-component handles
• Solid design and low weight
• Made in Germany by Rennsteig

Description

• Special tool to cut out side walls of wiring ducts
• Variable cutting depth up to 80 mm with one cut
• Neat cutting edges, down to the base of the duct
• Without burrs or cracks
• Lower part of tool with built-in ejector
• For the cut-off material
• Guiding noses on the blade part for centering of tool
• Tool automatically opens after cutting
• Made of special steel, burnished surface
• Ergonomically designed two-component handles
• Made in Germany, Made by Rennsteig
  

Description

• Precise rectangular cutting of composite (corrugated loom) and plastic pipes, ranging from 12 to 25 diameter
• Clean, smooth and burr-free cutting edges
• Safe cutting of the corrugated protective pipe on the outer diameter without damaging the inner pipe
• Due to short cutting distances (90°) cutting of the protective pipe also possible during installation process
• Optional: attachment of calibration arbor, e.g. for Geberit pipes of 11.5 and 15 mm diameter
• Replaceable blades
• Tool also available without protective pipe cutting attachment
• Ergonomically desigend two-component handles
• Made in Germany by Rennsteig

Description

• Burr-free cutting of composite and plastic pipes ranging from 18 to 40 mm diameter
• Precise vertical cut realized by automatic adaption of pipe support
• One-hand operation using ratchet mechanism
• High safety standard
• Automatic adjustment of blades for the respective pipe diameter
• Interchangeable Spare Blade
• Compact design
• Easy handling
• Ergonomically designed two-component handles
• Made in Germany by Rennsteig

Description

• burr-free cutting of plastic plates, plastic-tubes, cable trunks and skirtings
• 2 versions with cutting lengthes 60 mm and 110 mm available
• 110 mm model available with support to cut plastic plates or trunks
• very good cutting results, also with cutter's front part
• optimized leverage, constantly handforce while cutting
• ergonomic handles, good handling
• blades made of hardened cutting steel (replaceable spare part)
• burnished surface, ergonomically designed two-component handles
• Made in Germany
• Made by Rennsteig

Notching Pliers for notching out of rubber gaskets of glass cladding panels for buildings.

Made in Germany by Rennsteig.

This absolutely ergonomic plastic open end spanner is for tigthen and loosen of the cable gland. You can us this key also for breaking connections (open the locking) after they halready been locked together.

• tight pipes / flexible tubes easy to detach
• qualified for all pipe types for socketless fittings and quick disconnect couplers
• works even in locations difficult to access
• especially suited for use in built-in fittings and machines
• no damage of pipes (e.g. stress whitening)
• stable and handy
• Made in Germany
• Made by Rennsteig