Aviation Tools

P/N Please click here.

  • Digital crimping tool for crimping turned male and female contacts with an indenter geometry according to M22520/1-01
  • Indents adjustable in 0.01 mm increments, with digital reading
  • Multifunctional digital display, with settings shown in mm, inches or MIL selector settings according to M22520/1-01
  • Calibration and wear monitoring by means of enclosed gauge
  • RESET function for recalibration
  • Go- Nogo gauge usable for accurate calibration to MIL standard
  • Electronic wear monitoring with warning function
  • Reliable crimping with force lock and synchronous crimp indenters movement
  • Multiple information functions (remaining life, number of calibrations, serial number)
  • Rennsteig turrets and MIL turrets can also be used
  • Stores in a handy plastic case

P/N Please click here.

  • Digital crimping tool for crimping turned male and female contacts with an indenter geometry according to MIL 22520/7-01, MIL 22520/2-01 and MIL 22520/1-01
  • Indents adjustable in 0.01 mm increments, with digital reading
  • Multifunctional digital display, with settings shown in mm, inches or MIL selector settings according to MIL 22520/7-01, MIL 22520/2-01 and MIL 22520/1-01
  • Calibration and wear monitoring by means of enclosed gauge
  • RESET function for recalibration
  • Electronic wear monitoring with warning function
  • Reliable crimping with force lock and synchronous crimp indenters movement
  • Multiple information functions (remaining lifetime, number of calibrations, serial number)
  • Rennsteig turrets and MIL turrets likewise usable

  

P/N Please click here.

  • Special hand tool for crimping turned male and female contacts
  • Indenter geometry according to MIL 22520/7-01,   MIL 22520/2-01 and MIL 22520/1-01
  • Relevant crimp depth set by an 8-position selector
  • Selector setting according MIL
  • Single locators and multi pin locators available
  • Existing turrets fit to the tool
  • Go- Nogo gauge for accurate calibration according to MIL 22520/3-03 and MIL 22520/3-01 standard available
  • Forced locking system and synchronous drive of indenters for highly reliable crimp connections
  • Optimized opening width, ergonomic design and reduced handforce
  • Approval for aviation after successful qualification through Airbus SAS

P/N Please click here.

  • Digital crimping tool for crimping turned male and female contacts with an indenter geometry according to M22520/7-01 and M22520/2-01
  • Indents adjustable in 0.01 mm increments, with digital reading
  • Multifunctional digital display, with settings shown in mm, inches or MIL selector settings according to M22520/7-01 and M22520/2-01
  • Calibration and wear monitoring by means of enclosed gauge
  • RESET function for recalibration
  • Go- Nogo gauge usable for accurate calibration to MIL standard
  • Electronic wear monitoring with warning function
  • Reliable crimping with force lock and synchronous crimp indenters movement
  • Multiple information functions (remaining life, number of calibrations, serial number)
  • Rennsteig turrets and MIL turrets can also be used
  • Stores in a handy plastic case

P/N Please click here.

  • Electro-hydraulic Li-Ion battery-powered tool for crimping turned male and female contacts
  • 20kN pressure
  • 2.8 second crimp cycle
  • One battery charge lasts for about 300 10mm² crimps
  • Recharge in under 30 minutes
  • Multifunctional digital display, with settings shown in mm, inches or MIL selector settings according to M22520/1-01
  • Takes 4/8 indent heads

For detailed information click here.

  • Special Hand Tools for crimping turned pin or socket contacts with flexible Aluminium Cables
  • It is possible for this Kind of Tooling to complete a Conductor and Insulation Crimp in one single step with the Greatest Possible Precision

© 2017 Rennsteig Tools, Inc. All Rights Reserved.

Main Menu