SDS plus® Chisels for Milwaukee, HILTI, HITACHI, Bosch, AEG, Black&Decker, DeWalt, Duss, Kress, Makita, Metabo, Sparky...and many others.

  • SDS plus® Chisel for electric rotary hammers specially designed for durability and efficiency
  • Ground tip, fully tempered and laser engraved, exact chuck fit
  • For general-purpose chipping and demolition works in brickwork, concrete and rock
  • For removing plaster from walls and floors
  • Removal of heavy rust layers
  • Gives a well-directed off effect
  • Made in Germany by Rennsteig
Tip Type Length

Diameter

Shaft diameter

Tip width

Tip width

Weight

Packaging Unit

Packaging Unit

 
inch mm inch mm inch mm lbs.

Flat Cold Chisel Tip

P/N 212 25000
Flat Cold Chisel 9.842
250 0.551 14 0.787
20 0.59 10 Request a Quote!

Flat Cold Chisel Tip

P/N 212 25020

Wide Flat Cold Chisel

9.842 250 0.629 16 1.574 40 0.71 10 Request a Quote!

Flat Cold Chisel Tip

P/N 212 25021
Flat Cold Chisel, offset 9.842
250 0.629 
16 1.574
40 0.71 10 Request a Quote!

Pointed Chisel Tip

P/N 212 25001

Pointed Chisel 9.842 250 0.551 14
- 0.55 10 Request a Quote!

Grooving Chisel Tip

P/N 212 25003*

Grooving   (Gouge) Chisel 9.842 250 0.629 16 0.866
22 0.66 10 Request a Quote!

Spade Chisel Tip

P/N 212 25014

Spade (Scaling) Chisel 9.842 250 0.629 16 1.574 40 0.66 10 Request a Quote!

Toothed Chisel Tip

P/N 212 25005

Toothed Chisel 9.842 250 0.551 14 0.787 20 0.59 10 Request a Quote!

Floor Chisel Tip

P/N 212 25009

Floor Chisel with 30° offset 9.842 250 0.629 16 1.574 40 0.66 10 Request a Quote!

 

SDS plus chisels with holder

Chisels also available with display holders (SB). See below.
Tip Type Length

Diameter

Shaft diameter

Tip width

Tip width

Weight

Packaging Unit

Packaging Unit

 
inch mm inch mm inch mm lbs.

Flat Cold Chisel Tip

P/N 212 25000 SB
Flat Cold Chisel 9.842
250 0.551 
14 0.787
20 0.59 5 Request a Quote!

Pointed Chisel Tip

P/N 212 25001 SB

Pointed Chisel 9.842 250 0.551 14
- 0.55 5 Request a Quote!

Grooving Chisel Tip

P/N 212 25003 SB*

Grooving    (Gouge) Chisel 9.842 250 0.629 16 0.866
22 0.66 5 Request a Quote!

Spade Chisel Tip

P/N 212 25014 SB

Spade (Scaling) Chisel 9.842 250 0.629 16 1.574 40 0.66 5 Request a Quote!

Toothed Chisel Tip

P/N 212 25005 SB

Toothed Chisel 9.842 250 0.551 14 0.787 20 0.59 5 Request a Quote!

Floor Chisel Tip

P/N 212 25009 SB

Floor Chisel with 30° offset 9.842 250 0.629 16 1.574 40 0.66 5 Request a Quote!

* Not deigned for use on cast plast floor, armored concrete

Main Menu